ZOE/PSU-001_SmallPSU
1
0
Fork 0
Code Issues 1 Pull Requests Actions Packages Projects Releases Wiki Activity

Created the module

Browse Source
This commit is contained in:
Molly Zaugg
2024-12-15 12:34:25 -05:00
commit fe0c648948
20 changed files with 52138 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

31
README.md Normal file
View File

@@ -0,0 +1,31 @@
# ZOE - Small PSU
This is a super small PSU for powering only a few ZOE modules. It is a linear power supply with no current limiting, thermal protection, and only the most basic of filtering and ripple suprression. What this is though is a starting point for me to build and improve upon as I design larger power supplies with a bigger feature set. It should get the job done at the start, and once I am better and designing power supplies I can come back to it and add more.
This power supply is intended to mount inside a small enclosure with an external off-board transformer and power input module. I intend to use a Corcom power input module with built-in filtering so that there is at least something. The transformer is intended to be a Hammond Mfg. Power Transformer with a 120V primary and two 14V secondaries to get the +/-14V needed for the 7812 and 7912 to generate the +12V and -12V lines for the PSU. The +5V supply is a 7805 that is powered by the +12V rail.
This supply design is a combination of my own design, the MFOS Adjustable PSU, and the recommended design guide from the 78XX/79XX linear voltage regulator data sheet.
**Warning:** Other than the fuse in the power input module, this supply has no other fuses or current protection circuitry. Therefor it is dangerous and should only be used in a lab environment with experienced operators. Using this supply runs the risk of damaging anything connected to it, and also damaging the supply itself. Be careful when using it.
**Another Warning:** I don't believe this board is compliant with the Canadian Electrical Code or the Ontario Electrical Safety Code, and thus would likely not meet the electrical safety requirements in any other jurisdiction. Another version of this board will need to be developed for general public use.
## A Note on Capacitors
This boarrd features some big scary capacitors that don't have any means of discharge when power is disconnected. Please be careful when servicing the supply or using it outside of an enclosure (or with the enclosure open).
**Recommended method to discharge:** use a 100 ohm resistor to short the unregulated +14Vdc and -14Vdc rails to ground.
## Revision List
**Rev 1.0** - December 2024
- Created the design, layed out the board, generated the output files, did all the things for a very basic PSU design.
- Board features LEDs to show status of each power rail
- Board only has traces on the bottom, but is a two sided board to create a massive ground plane
- Should have ample smoothing, but once I build the first unit some testing will need to be done with my scope to actually see how good it is.
- PDF of the schematic
- List of Materials
## TODO list/future features:
- Proper current limiting or fusing on each output rail
- Input filtering on the board itself
- Transient supression on the board itself
- A method of discharging those big scary dangerous capacitors when the supply is switched off

3901
Rev 1.0/Outputs/SmallPSU-B_Cu.gbr Normal file
View File

File diff suppressed because it is too large Load Diff

269
Rev 1.0/Outputs/SmallPSU-B_Mask.gbr Normal file
View File

@@ -0,0 +1,269 @@
%TF.GenerationSoftware,KiCad,Pcbnew,8.0.6*%
%TF.CreationDate,2024-12-15T12:14:18-05:00*%
%TF.ProjectId,SmallPSU,536d616c-6c50-4535-952e-6b696361645f,1.0*%
%TF.SameCoordinates,Original*%
%TF.FileFunction,Soldermask,Bot*%
%TF.FilePolarity,Negative*%
%FSLAX46Y46*%
G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
G04 Created by KiCad (PCBNEW 8.0.6) date 2024-12-15 12:14:18*
%MOMM*%
%LPD*%
G01*
G04 APERTURE LIST*
%ADD10C,0.800000*%
%ADD11C,7.000000*%
%ADD12R,1.800000X1.800000*%
%ADD13C,1.800000*%
%ADD14R,2.000000X1.905000*%
%ADD15O,2.000000X1.905000*%
%ADD16C,1.600000*%
%ADD17R,2.400000X2.400000*%
%ADD18C,2.400000*%
%ADD19O,1.600000X1.600000*%
%ADD20O,1.700000X1.700000*%
%ADD21R,1.700000X1.700000*%
%ADD22R,2.200000X2.200000*%
%ADD23O,2.200000X2.200000*%
%ADD24C,2.200000*%
G04 APERTURE END LIST*
D10*
%TO.C,H7*%
X226750000Y-81000000D03*
X227518845Y-79143845D03*
X227518845Y-82856155D03*
X229375000Y-78375000D03*
D11*
X229375000Y-81000000D03*
D10*
X229375000Y-83625000D03*
X231231155Y-79143845D03*
X231231155Y-82856155D03*
X232000000Y-81000000D03*
%TD*%
%TO.C,H6*%
X226875000Y-31000000D03*
X227643845Y-29143845D03*
X227643845Y-32856155D03*
X229500000Y-28375000D03*
D11*
X229500000Y-31000000D03*
D10*
X229500000Y-33625000D03*
X231356155Y-29143845D03*
X231356155Y-32856155D03*
X232125000Y-31000000D03*
%TD*%
%TO.C,H5*%
X71875000Y-81643845D03*
X72643845Y-79787690D03*
X72643845Y-83500000D03*
X74500000Y-79018845D03*
D11*
X74500000Y-81643845D03*
D10*
X74500000Y-84268845D03*
X76356155Y-79787690D03*
X76356155Y-83500000D03*
X77125000Y-81643845D03*
%TD*%
%TO.C,H4*%
X71875000Y-30356155D03*
X72643845Y-28500000D03*
X72643845Y-32212310D03*
X74500000Y-27731155D03*
D11*
X74500000Y-30356155D03*
D10*
X74500000Y-32981155D03*
X76356155Y-28500000D03*
X76356155Y-32212310D03*
X77125000Y-30356155D03*
%TD*%
D12*
%TO.C,D5*%
X214500000Y-65960000D03*
D13*
X214500000Y-68500000D03*
%TD*%
D14*
%TO.C,U3*%
X174500000Y-33500000D03*
D15*
X174500000Y-30960000D03*
X174500000Y-28420000D03*
%TD*%
D16*
%TO.C,C6*%
X159500000Y-71000000D03*
X159500000Y-78500000D03*
%TD*%
D17*
%TO.C,C4*%
X142000000Y-73500000D03*
D18*
X142000000Y-78500000D03*
%TD*%
D17*
%TO.C,C3*%
X142000000Y-53500000D03*
D18*
X142000000Y-58500000D03*
%TD*%
D17*
%TO.C,C2*%
X122000000Y-73500000D03*
D18*
X122000000Y-78500000D03*
%TD*%
D10*
%TO.C,H3*%
X71875000Y-66000000D03*
X72643845Y-64143845D03*
X72643845Y-67856155D03*
X74500000Y-63375000D03*
D11*
X74500000Y-66000000D03*
D10*
X74500000Y-68625000D03*
X76356155Y-64143845D03*
X76356155Y-67856155D03*
X77125000Y-66000000D03*
%TD*%
%TO.C,H2*%
X71875000Y-56000000D03*
X72643845Y-54143845D03*
X72643845Y-57856155D03*
X74500000Y-53375000D03*
D11*
X74500000Y-56000000D03*
D10*
X74500000Y-58625000D03*
X76356155Y-54143845D03*
X76356155Y-57856155D03*
X77125000Y-56000000D03*
%TD*%
D14*
%TO.C,U2*%
X174500000Y-81080000D03*
D15*
X174500000Y-78540000D03*
X174500000Y-76000000D03*
%TD*%
D14*
%TO.C,U1*%
X174500000Y-53500000D03*
D15*
X174500000Y-50960000D03*
X174500000Y-48420000D03*
%TD*%
D16*
%TO.C,R3*%
X207000000Y-28340000D03*
D19*
X207000000Y-38500000D03*
%TD*%
D16*
%TO.C,R2*%
X207000000Y-75920000D03*
D19*
X207000000Y-65760000D03*
%TD*%
D16*
%TO.C,R1*%
X207000000Y-48340000D03*
D19*
X207000000Y-58500000D03*
%TD*%
D20*
%TO.C,J1*%
X225100000Y-74905000D03*
X225100000Y-72365000D03*
X225100000Y-69825000D03*
X225100000Y-67285000D03*
X225100000Y-64745000D03*
X225100000Y-62205000D03*
X225100000Y-59665000D03*
D21*
X225100000Y-57125000D03*
%TD*%
D10*
%TO.C,H1*%
X71875000Y-46000000D03*
X72643845Y-44143845D03*
X72643845Y-47856155D03*
X74500000Y-43375000D03*
D11*
X74500000Y-46000000D03*
D10*
X74500000Y-48625000D03*
X76356155Y-44143845D03*
X76356155Y-47856155D03*
X77125000Y-46000000D03*
%TD*%
D12*
%TO.C,D7*%
X214500000Y-35960000D03*
D13*
X214500000Y-38500000D03*
%TD*%
D22*
%TO.C,D6*%
X199500000Y-28500000D03*
D23*
X199500000Y-38660000D03*
%TD*%
D12*
%TO.C,D4*%
X214500000Y-56000000D03*
D13*
X214500000Y-58540000D03*
%TD*%
D22*
%TO.C,D3*%
X199500000Y-65920000D03*
D23*
X199500000Y-76080000D03*
%TD*%
D22*
%TO.C,D2*%
X199500000Y-48420000D03*
D23*
X199500000Y-58580000D03*
%TD*%
D22*
%TO.C,D1*%
X94250000Y-60750000D03*
D24*
X94350000Y-71250000D03*
X104750000Y-71250000D03*
X104750000Y-60750000D03*
%TD*%
D16*
%TO.C,C10*%
X192000000Y-28500000D03*
X192000000Y-36000000D03*
%TD*%
%TO.C,C9*%
X159500000Y-41000000D03*
X159500000Y-33500000D03*
%TD*%
%TO.C,C8*%
X192000000Y-68500000D03*
X192000000Y-76000000D03*
%TD*%
%TO.C,C7*%
X192000000Y-48500000D03*
X192000000Y-56000000D03*
%TD*%
%TO.C,C5*%
X159500000Y-53500000D03*
X159500000Y-61000000D03*
%TD*%
D17*
%TO.C,C1*%
X122000000Y-53500000D03*
D18*
X122000000Y-58500000D03*
%TD*%
M02*

15
Rev 1.0/Outputs/SmallPSU-B_Paste.gbr Normal file
View File

@@ -0,0 +1,15 @@
%TF.GenerationSoftware,KiCad,Pcbnew,8.0.6*%
%TF.CreationDate,2024-12-15T12:14:17-05:00*%
%TF.ProjectId,SmallPSU,536d616c-6c50-4535-952e-6b696361645f,1.0*%
%TF.SameCoordinates,Original*%
%TF.FileFunction,Paste,Bot*%
%TF.FilePolarity,Positive*%
%FSLAX46Y46*%
G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
G04 Created by KiCad (PCBNEW 8.0.6) date 2024-12-15 12:14:17*
%MOMM*%
%LPD*%
G01*
G04 APERTURE LIST*
G04 APERTURE END LIST*
M02*

141
Rev 1.0/Outputs/SmallPSU-B_Silkscreen.gbr Normal file
View File

@@ -0,0 +1,141 @@
%TF.GenerationSoftware,KiCad,Pcbnew,8.0.6*%
%TF.CreationDate,2024-12-15T12:14:17-05:00*%
%TF.ProjectId,SmallPSU,536d616c-6c50-4535-952e-6b696361645f,1.0*%
%TF.SameCoordinates,Original*%
%TF.FileFunction,Legend,Bot*%
%TF.FilePolarity,Positive*%
%FSLAX46Y46*%
G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
G04 Created by KiCad (PCBNEW 8.0.6) date 2024-12-15 12:14:17*
%MOMM*%
%LPD*%
G01*
G04 APERTURE LIST*
%ADD10C,0.150000*%
%ADD11C,0.120000*%
G04 APERTURE END LIST*
D10*
X229813333Y-53809819D02*
X229813333Y-54524104D01*
X229813333Y-54524104D02*
X229860952Y-54666961D01*
X229860952Y-54666961D02*
X229956190Y-54762200D01*
X229956190Y-54762200D02*
X230099047Y-54809819D01*
X230099047Y-54809819D02*
X230194285Y-54809819D01*
X228813333Y-54809819D02*
X229384761Y-54809819D01*
X229099047Y-54809819D02*
X229099047Y-53809819D01*
X229099047Y-53809819D02*
X229194285Y-53952676D01*
X229194285Y-53952676D02*
X229289523Y-54047914D01*
X229289523Y-54047914D02*
X229384761Y-54095533D01*
D11*
%TO.C,J1*%
X223990000Y-57125000D02*
X223990000Y-55795000D01*
X223990000Y-55795000D02*
X225100000Y-55795000D01*
X226150000Y-75265000D02*
X226560000Y-75265000D01*
X226150000Y-74545000D02*
X226560000Y-74545000D01*
X226150000Y-72725000D02*
X226560000Y-72725000D01*
X226150000Y-72005000D02*
X226560000Y-72005000D01*
X226150000Y-70185000D02*
X226560000Y-70185000D01*
X226150000Y-69465000D02*
X226560000Y-69465000D01*
X226150000Y-67645000D02*
X226560000Y-67645000D01*
X226150000Y-66925000D02*
X226560000Y-66925000D01*
X226150000Y-65105000D02*
X226560000Y-65105000D01*
X226150000Y-64385000D02*
X226560000Y-64385000D01*
X226150000Y-62565000D02*
X226560000Y-62565000D01*
X226150000Y-61845000D02*
X226560000Y-61845000D01*
X226150000Y-60025000D02*
X226560000Y-60025000D01*
X226150000Y-59305000D02*
X226560000Y-59305000D01*
X226210000Y-57485000D02*
X226560000Y-57485000D01*
X226210000Y-56765000D02*
X226560000Y-56765000D01*
X226560000Y-76235000D02*
X226560000Y-55795000D01*
X226560000Y-76235000D02*
X235190000Y-76235000D01*
X226560000Y-73635000D02*
X235190000Y-73635000D01*
X226560000Y-71095000D02*
X235190000Y-71095000D01*
X226560000Y-68555000D02*
X235190000Y-68555000D01*
X226560000Y-66015000D02*
X235190000Y-66015000D01*
X226560000Y-63475000D02*
X235190000Y-63475000D01*
X226560000Y-60935000D02*
X235190000Y-60935000D01*
X226560000Y-58395000D02*
X235190000Y-58395000D01*
X226560000Y-58276900D02*
X235190000Y-58276900D01*
X226560000Y-58158805D02*
X235190000Y-58158805D01*
X226560000Y-58040710D02*
X235190000Y-58040710D01*
X226560000Y-57922615D02*
X235190000Y-57922615D01*
X226560000Y-57804520D02*
X235190000Y-57804520D01*
X226560000Y-57686425D02*
X235190000Y-57686425D01*
X226560000Y-57568330D02*
X235190000Y-57568330D01*
X226560000Y-57450235D02*
X235190000Y-57450235D01*
X226560000Y-57332140D02*
X235190000Y-57332140D01*
X226560000Y-57214045D02*
X235190000Y-57214045D01*
X226560000Y-57095950D02*
X235190000Y-57095950D01*
X226560000Y-56977855D02*
X235190000Y-56977855D01*
X226560000Y-56859760D02*
X235190000Y-56859760D01*
X226560000Y-56741665D02*
X235190000Y-56741665D01*
X226560000Y-56623570D02*
X235190000Y-56623570D01*
X226560000Y-56505475D02*
X235190000Y-56505475D01*
X226560000Y-56387380D02*
X235190000Y-56387380D01*
X226560000Y-56269285D02*
X235190000Y-56269285D01*
X226560000Y-56151190D02*
X235190000Y-56151190D01*
X226560000Y-56033095D02*
X235190000Y-56033095D01*
X226560000Y-55915000D02*
X235190000Y-55915000D01*
X226560000Y-55795000D02*
X235190000Y-55795000D01*
X235190000Y-76235000D02*
X235190000Y-55795000D01*
%TD*%
M02*

23
Rev 1.0/Outputs/SmallPSU-Edge_Cuts.gbr Normal file
View File

@@ -0,0 +1,23 @@
%TF.GenerationSoftware,KiCad,Pcbnew,8.0.6*%
%TF.CreationDate,2024-12-15T12:14:18-05:00*%
%TF.ProjectId,SmallPSU,536d616c-6c50-4535-952e-6b696361645f,1.0*%
%TF.SameCoordinates,Original*%
%TF.FileFunction,Profile,NP*%
%FSLAX46Y46*%
G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
G04 Created by KiCad (PCBNEW 8.0.6) date 2024-12-15 12:14:18*
%MOMM*%
%LPD*%
G01*
G04 APERTURE LIST*
%TA.AperFunction,Profile*%
%ADD10C,0.050000*%
%TD*%
G04 APERTURE END LIST*
D10*
X67000000Y-23500000D02*
X237000000Y-23500000D01*
X237000000Y-88500000D01*
X67000000Y-88500000D01*
X67000000Y-23500000D01*
M02*

4893
Rev 1.0/Outputs/SmallPSU-F_Cu.gbr Normal file
View File

File diff suppressed because it is too large Load Diff

269
Rev 1.0/Outputs/SmallPSU-F_Mask.gbr Normal file
View File

@@ -0,0 +1,269 @@
%TF.GenerationSoftware,KiCad,Pcbnew,8.0.6*%
%TF.CreationDate,2024-12-15T12:14:18-05:00*%
%TF.ProjectId,SmallPSU,536d616c-6c50-4535-952e-6b696361645f,1.0*%
%TF.SameCoordinates,Original*%
%TF.FileFunction,Soldermask,Top*%
%TF.FilePolarity,Negative*%
%FSLAX46Y46*%
G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
G04 Created by KiCad (PCBNEW 8.0.6) date 2024-12-15 12:14:18*
%MOMM*%
%LPD*%
G01*
G04 APERTURE LIST*
%ADD10C,0.800000*%
%ADD11C,7.000000*%
%ADD12R,1.800000X1.800000*%
%ADD13C,1.800000*%
%ADD14R,2.000000X1.905000*%
%ADD15O,2.000000X1.905000*%
%ADD16C,1.600000*%
%ADD17R,2.400000X2.400000*%
%ADD18C,2.400000*%
%ADD19O,1.600000X1.600000*%
%ADD20O,1.700000X1.700000*%
%ADD21R,1.700000X1.700000*%
%ADD22R,2.200000X2.200000*%
%ADD23O,2.200000X2.200000*%
%ADD24C,2.200000*%
G04 APERTURE END LIST*
D10*
%TO.C,H7*%
X226750000Y-81000000D03*
X227518845Y-79143845D03*
X227518845Y-82856155D03*
X229375000Y-78375000D03*
D11*
X229375000Y-81000000D03*
D10*
X229375000Y-83625000D03*
X231231155Y-79143845D03*
X231231155Y-82856155D03*
X232000000Y-81000000D03*
%TD*%
%TO.C,H6*%
X226875000Y-31000000D03*
X227643845Y-29143845D03*
X227643845Y-32856155D03*
X229500000Y-28375000D03*
D11*
X229500000Y-31000000D03*
D10*
X229500000Y-33625000D03*
X231356155Y-29143845D03*
X231356155Y-32856155D03*
X232125000Y-31000000D03*
%TD*%
%TO.C,H5*%
X71875000Y-81643845D03*
X72643845Y-79787690D03*
X72643845Y-83500000D03*
X74500000Y-79018845D03*
D11*
X74500000Y-81643845D03*
D10*
X74500000Y-84268845D03*
X76356155Y-79787690D03*
X76356155Y-83500000D03*
X77125000Y-81643845D03*
%TD*%
%TO.C,H4*%
X71875000Y-30356155D03*
X72643845Y-28500000D03*
X72643845Y-32212310D03*
X74500000Y-27731155D03*
D11*
X74500000Y-30356155D03*
D10*
X74500000Y-32981155D03*
X76356155Y-28500000D03*
X76356155Y-32212310D03*
X77125000Y-30356155D03*
%TD*%
D12*
%TO.C,D5*%
X214500000Y-65960000D03*
D13*
X214500000Y-68500000D03*
%TD*%
D14*
%TO.C,U3*%
X174500000Y-33500000D03*
D15*
X174500000Y-30960000D03*
X174500000Y-28420000D03*
%TD*%
D16*
%TO.C,C6*%
X159500000Y-71000000D03*
X159500000Y-78500000D03*
%TD*%
D17*
%TO.C,C4*%
X142000000Y-73500000D03*
D18*
X142000000Y-78500000D03*
%TD*%
D17*
%TO.C,C3*%
X142000000Y-53500000D03*
D18*
X142000000Y-58500000D03*
%TD*%
D17*
%TO.C,C2*%
X122000000Y-73500000D03*
D18*
X122000000Y-78500000D03*
%TD*%
D10*
%TO.C,H3*%
X71875000Y-66000000D03*
X72643845Y-64143845D03*
X72643845Y-67856155D03*
X74500000Y-63375000D03*
D11*
X74500000Y-66000000D03*
D10*
X74500000Y-68625000D03*
X76356155Y-64143845D03*
X76356155Y-67856155D03*
X77125000Y-66000000D03*
%TD*%
%TO.C,H2*%
X71875000Y-56000000D03*
X72643845Y-54143845D03*
X72643845Y-57856155D03*
X74500000Y-53375000D03*
D11*
X74500000Y-56000000D03*
D10*
X74500000Y-58625000D03*
X76356155Y-54143845D03*
X76356155Y-57856155D03*
X77125000Y-56000000D03*
%TD*%
D14*
%TO.C,U2*%
X174500000Y-81080000D03*
D15*
X174500000Y-78540000D03*
X174500000Y-76000000D03*
%TD*%
D14*
%TO.C,U1*%
X174500000Y-53500000D03*
D15*
X174500000Y-50960000D03*
X174500000Y-48420000D03*
%TD*%
D16*
%TO.C,R3*%
X207000000Y-28340000D03*
D19*
X207000000Y-38500000D03*
%TD*%
D16*
%TO.C,R2*%
X207000000Y-75920000D03*
D19*
X207000000Y-65760000D03*
%TD*%
D16*
%TO.C,R1*%
X207000000Y-48340000D03*
D19*
X207000000Y-58500000D03*
%TD*%
D20*
%TO.C,J1*%
X225100000Y-74905000D03*
X225100000Y-72365000D03*
X225100000Y-69825000D03*
X225100000Y-67285000D03*
X225100000Y-64745000D03*
X225100000Y-62205000D03*
X225100000Y-59665000D03*
D21*
X225100000Y-57125000D03*
%TD*%
D10*
%TO.C,H1*%
X71875000Y-46000000D03*
X72643845Y-44143845D03*
X72643845Y-47856155D03*
X74500000Y-43375000D03*
D11*
X74500000Y-46000000D03*
D10*
X74500000Y-48625000D03*
X76356155Y-44143845D03*
X76356155Y-47856155D03*
X77125000Y-46000000D03*
%TD*%
D12*
%TO.C,D7*%
X214500000Y-35960000D03*
D13*
X214500000Y-38500000D03*
%TD*%
D22*
%TO.C,D6*%
X199500000Y-28500000D03*
D23*
X199500000Y-38660000D03*
%TD*%
D12*
%TO.C,D4*%
X214500000Y-56000000D03*
D13*
X214500000Y-58540000D03*
%TD*%
D22*
%TO.C,D3*%
X199500000Y-65920000D03*
D23*
X199500000Y-76080000D03*
%TD*%
D22*
%TO.C,D2*%
X199500000Y-48420000D03*
D23*
X199500000Y-58580000D03*
%TD*%
D22*
%TO.C,D1*%
X94250000Y-60750000D03*
D24*
X94350000Y-71250000D03*
X104750000Y-71250000D03*
X104750000Y-60750000D03*
%TD*%
D16*
%TO.C,C10*%
X192000000Y-28500000D03*
X192000000Y-36000000D03*
%TD*%
%TO.C,C9*%
X159500000Y-41000000D03*
X159500000Y-33500000D03*
%TD*%
%TO.C,C8*%
X192000000Y-68500000D03*
X192000000Y-76000000D03*
%TD*%
%TO.C,C7*%
X192000000Y-48500000D03*
X192000000Y-56000000D03*
%TD*%
%TO.C,C5*%
X159500000Y-53500000D03*
X159500000Y-61000000D03*
%TD*%
D17*
%TO.C,C1*%
X122000000Y-53500000D03*
D18*
X122000000Y-58500000D03*
%TD*%
M02*

15
Rev 1.0/Outputs/SmallPSU-F_Paste.gbr Normal file
View File

@@ -0,0 +1,15 @@
%TF.GenerationSoftware,KiCad,Pcbnew,8.0.6*%
%TF.CreationDate,2024-12-15T12:14:17-05:00*%
%TF.ProjectId,SmallPSU,536d616c-6c50-4535-952e-6b696361645f,1.0*%
%TF.SameCoordinates,Original*%
%TF.FileFunction,Paste,Top*%
%TF.FilePolarity,Positive*%
%FSLAX46Y46*%
G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
G04 Created by KiCad (PCBNEW 8.0.6) date 2024-12-15 12:14:17*
%MOMM*%
%LPD*%
G01*
G04 APERTURE LIST*
G04 APERTURE END LIST*
M02*

9906
Rev 1.0/Outputs/SmallPSU-F_Silkscreen.gbr Normal file
View File

File diff suppressed because it is too large Load Diff

162
Rev 1.0/Outputs/SmallPSU-NPTH-drl_map.gbr Normal file
View File

@@ -0,0 +1,162 @@
%TF.GenerationSoftware,KiCad,Pcbnew,8.0.6*%
%TF.CreationDate,2024-12-15T12:14:28-05:00*%
%TF.ProjectId,SmallPSU,536d616c-6c50-4535-952e-6b696361645f,1.0*%
%TF.SameCoordinates,Original*%
%TF.FileFunction,Drillmap*%
%TF.FilePolarity,Positive*%
%FSLAX45Y45*%
G04 Gerber Fmt 4.5, Leading zero omitted, Abs format (unit mm)*
G04 Created by KiCad (PCBNEW 8.0.6) date 2024-12-15 12:14:28*
%MOMM*%
%LPD*%
G01*
G04 APERTURE LIST*
%ADD10C,0.050000*%
%ADD11C,0.200000*%
G04 APERTURE END LIST*
D10*
X6700000Y-2350000D02*
X23700000Y-2350000D01*
X23700000Y-8850000D01*
X6700000Y-8850000D01*
X6700000Y-2350000D01*
D11*
X6958277Y-9163984D02*
X6958277Y-8963984D01*
X6958277Y-8963984D02*
X7005896Y-8963984D01*
X7005896Y-8963984D02*
X7034467Y-8973508D01*
X7034467Y-8973508D02*
X7053515Y-8992555D01*
X7053515Y-8992555D02*
X7063039Y-9011603D01*
X7063039Y-9011603D02*
X7072562Y-9049698D01*
X7072562Y-9049698D02*
X7072562Y-9078270D01*
X7072562Y-9078270D02*
X7063039Y-9116365D01*
X7063039Y-9116365D02*
X7053515Y-9135412D01*
X7053515Y-9135412D02*
X7034467Y-9154460D01*
X7034467Y-9154460D02*
X7005896Y-9163984D01*
X7005896Y-9163984D02*
X6958277Y-9163984D01*
X7158277Y-9163984D02*
X7158277Y-9030650D01*
X7158277Y-9068746D02*
X7167801Y-9049698D01*
X7167801Y-9049698D02*
X7177324Y-9040174D01*
X7177324Y-9040174D02*
X7196372Y-9030650D01*
X7196372Y-9030650D02*
X7215420Y-9030650D01*
X7282086Y-9163984D02*
X7282086Y-9030650D01*
X7282086Y-8963984D02*
X7272562Y-8973508D01*
X7272562Y-8973508D02*
X7282086Y-8983031D01*
X7282086Y-8983031D02*
X7291610Y-8973508D01*
X7291610Y-8973508D02*
X7282086Y-8963984D01*
X7282086Y-8963984D02*
X7282086Y-8983031D01*
X7405896Y-9163984D02*
X7386848Y-9154460D01*
X7386848Y-9154460D02*
X7377324Y-9135412D01*
X7377324Y-9135412D02*
X7377324Y-8963984D01*
X7510658Y-9163984D02*
X7491610Y-9154460D01*
X7491610Y-9154460D02*
X7482086Y-9135412D01*
X7482086Y-9135412D02*
X7482086Y-8963984D01*
X7739229Y-9163984D02*
X7739229Y-8963984D01*
X7739229Y-8963984D02*
X7805896Y-9106841D01*
X7805896Y-9106841D02*
X7872562Y-8963984D01*
X7872562Y-8963984D02*
X7872562Y-9163984D01*
X8053515Y-9163984D02*
X8053515Y-9059222D01*
X8053515Y-9059222D02*
X8043991Y-9040174D01*
X8043991Y-9040174D02*
X8024943Y-9030650D01*
X8024943Y-9030650D02*
X7986848Y-9030650D01*
X7986848Y-9030650D02*
X7967801Y-9040174D01*
X8053515Y-9154460D02*
X8034467Y-9163984D01*
X8034467Y-9163984D02*
X7986848Y-9163984D01*
X7986848Y-9163984D02*
X7967801Y-9154460D01*
X7967801Y-9154460D02*
X7958277Y-9135412D01*
X7958277Y-9135412D02*
X7958277Y-9116365D01*
X7958277Y-9116365D02*
X7967801Y-9097317D01*
X7967801Y-9097317D02*
X7986848Y-9087793D01*
X7986848Y-9087793D02*
X8034467Y-9087793D01*
X8034467Y-9087793D02*
X8053515Y-9078270D01*
X8148753Y-9030650D02*
X8148753Y-9230650D01*
X8148753Y-9040174D02*
X8167801Y-9030650D01*
X8167801Y-9030650D02*
X8205896Y-9030650D01*
X8205896Y-9030650D02*
X8224943Y-9040174D01*
X8224943Y-9040174D02*
X8234467Y-9049698D01*
X8234467Y-9049698D02*
X8243991Y-9068746D01*
X8243991Y-9068746D02*
X8243991Y-9125889D01*
X8243991Y-9125889D02*
X8234467Y-9144936D01*
X8234467Y-9144936D02*
X8224943Y-9154460D01*
X8224943Y-9154460D02*
X8205896Y-9163984D01*
X8205896Y-9163984D02*
X8167801Y-9163984D01*
X8167801Y-9163984D02*
X8148753Y-9154460D01*
X8329705Y-9144936D02*
X8339229Y-9154460D01*
X8339229Y-9154460D02*
X8329705Y-9163984D01*
X8329705Y-9163984D02*
X8320182Y-9154460D01*
X8320182Y-9154460D02*
X8329705Y-9144936D01*
X8329705Y-9144936D02*
X8329705Y-9163984D01*
X8329705Y-9040174D02*
X8339229Y-9049698D01*
X8339229Y-9049698D02*
X8329705Y-9059222D01*
X8329705Y-9059222D02*
X8320182Y-9049698D01*
X8320182Y-9049698D02*
X8329705Y-9040174D01*
X8329705Y-9040174D02*
X8329705Y-9059222D01*
M02*

12
Rev 1.0/Outputs/SmallPSU-NPTH.drl Normal file
View File

@@ -0,0 +1,12 @@
M48
; DRILL file {KiCad 8.0.6} date 2024-12-15T12:14:25-0500
; FORMAT={-:-/ absolute / inch / decimal}
; #@! TF.CreationDate,2024-12-15T12:14:25-05:00
; #@! TF.GenerationSoftware,Kicad,Pcbnew,8.0.6
; #@! TF.FileFunction,NonPlated,1,2,NPTH
FMAT,2
INCH
%
G90
G05
M30

4864
Rev 1.0/Outputs/SmallPSU-PTH-drl_map.gbr Normal file
View File

File diff suppressed because it is too large Load Diff

155
Rev 1.0/Outputs/SmallPSU-PTH.drl Normal file
View File

@@ -0,0 +1,155 @@
M48
; DRILL file {KiCad 8.0.6} date 2024-12-15T12:14:25-0500
; FORMAT={-:-/ absolute / inch / decimal}
; #@! TF.CreationDate,2024-12-15T12:14:25-05:00
; #@! TF.GenerationSoftware,Kicad,Pcbnew,8.0.6
; #@! TF.FileFunction,Plated,1,2,PTH
FMAT,2
INCH
; #@! TA.AperFunction,Plated,PTH,ComponentDrill
T1C0.0197
; #@! TA.AperFunction,Plated,PTH,ComponentDrill
T2C0.0315
; #@! TA.AperFunction,Plated,PTH,ComponentDrill
T3C0.0354
; #@! TA.AperFunction,Plated,PTH,ComponentDrill
T4C0.0394
; #@! TA.AperFunction,Plated,PTH,ComponentDrill
T5C0.0433
; #@! TA.AperFunction,Plated,PTH,ComponentDrill
T6C0.0472
; #@! TA.AperFunction,Plated,PTH,ComponentDrill
T7C0.1378
%
G90
G05
T1
X2.8297Y-1.1951
X2.8297Y-1.811
X2.8297Y-2.2047
X2.8297Y-2.5984
X2.8297Y-3.2143
X2.86Y-1.122
X2.86Y-1.2682
X2.86Y-1.7379
X2.86Y-1.8841
X2.86Y-2.1316
X2.86Y-2.2778
X2.86Y-2.5253
X2.86Y-2.6715
X2.86Y-3.1412
X2.86Y-3.2874
X2.9331Y-1.0918
X2.9331Y-1.2985
X2.9331Y-1.7077
X2.9331Y-1.9144
X2.9331Y-2.1014
X2.9331Y-2.3081
X2.9331Y-2.4951
X2.9331Y-2.7018
X2.9331Y-3.111
X2.9331Y-3.3177
X3.0061Y-1.122
X3.0061Y-1.2682
X3.0061Y-1.7379
X3.0061Y-1.8841
X3.0061Y-2.1316
X3.0061Y-2.2778
X3.0061Y-2.5253
X3.0061Y-2.6715
X3.0061Y-3.1412
X3.0061Y-3.2874
X3.0364Y-1.1951
X3.0364Y-1.811
X3.0364Y-2.2047
X3.0364Y-2.5984
X3.0364Y-3.2143
X8.9272Y-3.189
X8.9321Y-1.2205
X8.9574Y-3.1159
X8.9574Y-3.2621
X8.9624Y-1.1474
X8.9624Y-1.2935
X9.0305Y-3.0856
X9.0305Y-3.2923
X9.0354Y-1.1171
X9.0354Y-1.3238
X9.1036Y-3.1159
X9.1036Y-3.2621
X9.1085Y-1.1474
X9.1085Y-1.2935
X9.1339Y-3.189
X9.1388Y-1.2205
T2
X6.2795Y-1.3189
X6.2795Y-1.6142
X6.2795Y-2.1063
X6.2795Y-2.4016
X6.2795Y-2.7953
X6.2795Y-3.0906
X7.5591Y-1.122
X7.5591Y-1.4173
X7.5591Y-1.9094
X7.5591Y-2.2047
X7.5591Y-2.6969
X7.5591Y-2.9921
X8.1496Y-1.1157
X8.1496Y-1.5157
X8.1496Y-1.9031
X8.1496Y-2.3031
X8.1496Y-2.589
X8.1496Y-2.989
T3
X8.4449Y-1.4157
X8.4449Y-1.5157
X8.4449Y-2.2047
X8.4449Y-2.3047
X8.4449Y-2.5969
X8.4449Y-2.6969
T4
X8.8622Y-2.249
X8.8622Y-2.349
X8.8622Y-2.449
X8.8622Y-2.549
X8.8622Y-2.649
X8.8622Y-2.749
X8.8622Y-2.849
X8.8622Y-2.949
T5
X3.7106Y-2.3917
X3.7146Y-2.8051
X4.124Y-2.3917
X4.124Y-2.8051
X6.8701Y-1.1189
X6.8701Y-1.2189
X6.8701Y-1.3189
X6.8701Y-1.9063
X6.8701Y-2.0063
X6.8701Y-2.1063
X6.8701Y-2.9921
X6.8701Y-3.0921
X6.8701Y-3.1921
X7.8543Y-1.122
X7.8543Y-1.522
X7.8543Y-1.9063
X7.8543Y-2.3063
X7.8543Y-2.5953
X7.8543Y-2.9953
T6
X4.8031Y-2.1063
X4.8031Y-2.3031
X4.8031Y-2.8937
X4.8031Y-3.0906
X5.5906Y-2.1063
X5.5906Y-2.3031
X5.5906Y-2.8937
X5.5906Y-3.0906
T7
X2.9331Y-1.1951
X2.9331Y-1.811
X2.9331Y-2.2047
X2.9331Y-2.5984
X2.9331Y-3.2143
X9.0305Y-3.189
X9.0354Y-1.2205
M30

122
Rev 1.0/Outputs/SmallPSU-job.gbrjob Normal file
View File

@@ -0,0 +1,122 @@
{
"Header": {
"GenerationSoftware": {
"Vendor": "KiCad",
"Application": "Pcbnew",
"Version": "8.0.6"
},
"CreationDate": "2024-12-15T12:14:18-05:00"
},
"GeneralSpecs": {
"ProjectId": {
"Name": "SmallPSU",
"GUID": "536d616c-6c50-4535-952e-6b696361645f",
"Revision": "1.0"
},
"Size": {
"X": 170.05,
"Y": 65.05
},
"LayerNumber": 2,
"BoardThickness": 1.6,
"Finish": "None"
},
"DesignRules": [
{
"Layers": "Outer",
"PadToPad": 0.2,
"PadToTrack": 0.2,
"TrackToTrack": 0.2,
"MinLineWidth": 1.4,
"TrackToRegion": 0.5,
"RegionToRegion": 0.5
}
],
"FilesAttributes": [
{
"Path": "SmallPSU-F_Cu.gbr",
"FileFunction": "Copper,L1,Top",
"FilePolarity": "Positive"
},
{
"Path": "SmallPSU-B_Cu.gbr",
"FileFunction": "Copper,L2,Bot",
"FilePolarity": "Positive"
},
{
"Path": "SmallPSU-F_Paste.gbr",
"FileFunction": "SolderPaste,Top",
"FilePolarity": "Positive"
},
{
"Path": "SmallPSU-B_Paste.gbr",
"FileFunction": "SolderPaste,Bot",
"FilePolarity": "Positive"
},
{
"Path": "SmallPSU-F_Silkscreen.gbr",
"FileFunction": "Legend,Top",
"FilePolarity": "Positive"
},
{
"Path": "SmallPSU-B_Silkscreen.gbr",
"FileFunction": "Legend,Bot",
"FilePolarity": "Positive"
},
{
"Path": "SmallPSU-F_Mask.gbr",
"FileFunction": "SolderMask,Top",
"FilePolarity": "Negative"
},
{
"Path": "SmallPSU-B_Mask.gbr",
"FileFunction": "SolderMask,Bot",
"FilePolarity": "Negative"
},
{
"Path": "SmallPSU-Edge_Cuts.gbr",
"FileFunction": "Profile",
"FilePolarity": "Positive"
}
],
"MaterialStackup": [
{
"Type": "Legend",
"Name": "Top Silk Screen"
},
{
"Type": "SolderPaste",
"Name": "Top Solder Paste"
},
{
"Type": "SolderMask",
"Name": "Top Solder Mask"
},
{
"Type": "Copper",
"Name": "F.Cu"
},
{
"Type": "Dielectric",
"Material": "FR4",
"Name": "F.Cu/B.Cu",
"Notes": "Type: dielectric layer 1 (from F.Cu to B.Cu)"
},
{
"Type": "Copper",
"Name": "B.Cu"
},
{
"Type": "SolderMask",
"Name": "Bottom Solder Mask"
},
{
"Type": "SolderPaste",
"Name": "Bottom Solder Paste"
},
{
"Type": "Legend",
"Name": "Bottom Silk Screen"
}
]
}

20537
Rev 1.0/SmallPSU.kicad_pcb Normal file
View File

File diff suppressed because it is too large Load Diff

83
Rev 1.0/SmallPSU.kicad_prl Normal file
View File

@@ -0,0 +1,83 @@
{
"board": {
"active_layer": 37,
"active_layer_preset": "All Layers",
"auto_track_width": true,
"hidden_netclasses": [],
"hidden_nets": [],
"high_contrast_mode": 0,
"net_color_mode": 1,
"opacity": {
"images": 0.6,
"pads": 1.0,
"tracks": 1.0,
"vias": 1.0,
"zones": 0.6
},
"selection_filter": {
"dimensions": true,
"footprints": true,
"graphics": true,
"keepouts": true,
"lockedItems": false,
"otherItems": true,
"pads": true,
"text": true,
"tracks": true,
"vias": true,
"zones": true
},
"visible_items": [
0,
1,
2,
3,
4,
5,
8,
9,
10,
11,
12,
13,
15,
16,
17,
18,
19,
20,
21,
22,
23,
24,
25,
26,
27,
28,
29,
30,
32,
33,
34,
35,
36,
39,
40
],
"visible_layers": "fffffff_ffffffff",
"zone_display_mode": 0
},
"git": {
"repo_password": "",
"repo_type": "",
"repo_username": "",
"ssh_key": ""
},
"meta": {
"filename": "SmallPSU.kicad_prl",
"version": 3
},
"project": {
"files": []
}
}

623
Rev 1.0/SmallPSU.kicad_pro Normal file
View File

@@ -0,0 +1,623 @@
{
"board": {
"3dviewports": [],
"design_settings": {
"defaults": {
"apply_defaults_to_fp_fields": false,
"apply_defaults_to_fp_shapes": false,
"apply_defaults_to_fp_text": false,
"board_outline_line_width": 0.05,
"copper_line_width": 0.2,
"copper_text_italic": false,
"copper_text_size_h": 1.5,
"copper_text_size_v": 1.5,
"copper_text_thickness": 0.3,
"copper_text_upright": false,
"courtyard_line_width": 0.05,
"dimension_precision": 4,
"dimension_units": 3,
"dimensions": {
"arrow_length": 1270000,
"extension_offset": 500000,
"keep_text_aligned": true,
"suppress_zeroes": false,
"text_position": 0,
"units_format": 1
},
"fab_line_width": 0.1,
"fab_text_italic": false,
"fab_text_size_h": 1.0,
"fab_text_size_v": 1.0,
"fab_text_thickness": 0.15,
"fab_text_upright": false,
"other_line_width": 0.1,
"other_text_italic": false,
"other_text_size_h": 1.0,
"other_text_size_v": 1.0,
"other_text_thickness": 0.15,
"other_text_upright": false,
"pads": {
"drill": 0.762,
"height": 1.524,
"width": 1.524
},
"silk_line_width": 0.1,
"silk_text_italic": false,
"silk_text_size_h": 1.0,
"silk_text_size_v": 1.0,
"silk_text_thickness": 0.1,
"silk_text_upright": false,
"zones": {
"min_clearance": 0.5
}
},
"diff_pair_dimensions": [
{
"gap": 0.0,
"via_gap": 0.0,
"width": 0.0
}
],
"drc_exclusions": [],
"meta": {
"version": 2
},
"rule_severities": {
"annular_width": "error",
"clearance": "error",
"connection_width": "warning",
"copper_edge_clearance": "error",
"copper_sliver": "warning",
"courtyards_overlap": "error",
"diff_pair_gap_out_of_range": "error",
"diff_pair_uncoupled_length_too_long": "error",
"drill_out_of_range": "error",
"duplicate_footprints": "warning",
"extra_footprint": "warning",
"footprint": "error",
"footprint_symbol_mismatch": "warning",
"footprint_type_mismatch": "ignore",
"hole_clearance": "error",
"hole_near_hole": "error",
"holes_co_located": "warning",
"invalid_outline": "error",
"isolated_copper": "warning",
"item_on_disabled_layer": "error",
"items_not_allowed": "error",
"length_out_of_range": "error",
"lib_footprint_issues": "warning",
"lib_footprint_mismatch": "warning",
"malformed_courtyard": "error",
"microvia_drill_out_of_range": "error",
"missing_courtyard": "ignore",
"missing_footprint": "warning",
"net_conflict": "warning",
"npth_inside_courtyard": "ignore",
"padstack": "warning",
"pth_inside_courtyard": "ignore",
"shorting_items": "error",
"silk_edge_clearance": "warning",
"silk_over_copper": "warning",
"silk_overlap": "warning",
"skew_out_of_range": "error",
"solder_mask_bridge": "error",
"starved_thermal": "error",
"text_height": "warning",
"text_thickness": "warning",
"through_hole_pad_without_hole": "error",
"too_many_vias": "error",
"track_dangling": "warning",
"track_width": "error",
"tracks_crossing": "error",
"unconnected_items": "error",
"unresolved_variable": "error",
"via_dangling": "warning",
"zones_intersect": "error"
},
"rules": {
"max_error": 0.005,
"min_clearance": 0.0,
"min_connection": 0.0,
"min_copper_edge_clearance": 0.5,
"min_hole_clearance": 0.25,
"min_hole_to_hole": 0.25,
"min_microvia_diameter": 0.2,
"min_microvia_drill": 0.1,
"min_resolved_spokes": 2,
"min_silk_clearance": 0.0,
"min_text_height": 0.8,
"min_text_thickness": 0.08,
"min_through_hole_diameter": 0.3,
"min_track_width": 0.0,
"min_via_annular_width": 0.1,
"min_via_diameter": 0.5,
"solder_mask_to_copper_clearance": 0.0,
"use_height_for_length_calcs": true
},
"teardrop_options": [
{
"td_onpadsmd": true,
"td_onroundshapesonly": false,
"td_ontrackend": false,
"td_onviapad": true
}
],
"teardrop_parameters": [
{
"td_allow_use_two_tracks": true,
"td_curve_segcount": 0,
"td_height_ratio": 1.0,
"td_length_ratio": 0.5,
"td_maxheight": 2.0,
"td_maxlen": 1.0,
"td_on_pad_in_zone": false,
"td_target_name": "td_round_shape",
"td_width_to_size_filter_ratio": 0.9
},
{
"td_allow_use_two_tracks": true,
"td_curve_segcount": 0,
"td_height_ratio": 1.0,
"td_length_ratio": 0.5,
"td_maxheight": 2.0,
"td_maxlen": 1.0,
"td_on_pad_in_zone": false,
"td_target_name": "td_rect_shape",
"td_width_to_size_filter_ratio": 0.9
},
{
"td_allow_use_two_tracks": true,
"td_curve_segcount": 0,
"td_height_ratio": 1.0,
"td_length_ratio": 0.5,
"td_maxheight": 2.0,
"td_maxlen": 1.0,
"td_on_pad_in_zone": false,
"td_target_name": "td_track_end",
"td_width_to_size_filter_ratio": 0.9
}
],
"track_widths": [
0.0,
1.4,
2.25
],
"tuning_pattern_settings": {
"diff_pair_defaults": {
"corner_radius_percentage": 80,
"corner_style": 1,
"max_amplitude": 1.0,
"min_amplitude": 0.2,
"single_sided": false,
"spacing": 1.0
},
"diff_pair_skew_defaults": {
"corner_radius_percentage": 80,
"corner_style": 1,
"max_amplitude": 1.0,
"min_amplitude": 0.2,
"single_sided": false,
"spacing": 0.6
},
"single_track_defaults": {
"corner_radius_percentage": 80,
"corner_style": 1,
"max_amplitude": 1.0,
"min_amplitude": 0.2,
"single_sided": false,
"spacing": 0.6
}
},
"via_dimensions": [
{
"diameter": 0.0,
"drill": 0.0
}
],
"zones_allow_external_fillets": false
},
"ipc2581": {
"dist": "",
"distpn": "",
"internal_id": "",
"mfg": "",
"mpn": ""
},
"layer_presets": [],
"viewports": []
},
"boards": [],
"cvpcb": {
"equivalence_files": []
},
"erc": {
"erc_exclusions": [],
"meta": {
"version": 0
},
"pin_map": [
[
0,
0,
0,
0,
0,
0,
1,
0,
0,
0,
0,
2
],
[
0,
2,
0,
1,
0,
0,
1,
0,
2,
2,
2,
2
],
[
0,
0,
0,
0,
0,
0,
1,
0,
1,
0,
1,
2
],
[
0,
1,
0,
0,
0,
0,
1,
1,
2,
1,
1,
2
],
[
0,
0,
0,
0,
0,
0,
1,
0,
0,
0,
0,
2
],
[
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
2
],
[
1,
1,
1,
1,
1,
0,
1,
1,
1,
1,
1,
2
],
[
0,
0,
0,
1,
0,
0,
1,
0,
0,
0,
0,
2
],
[
0,
2,
1,
2,
0,
0,
1,
0,
2,
2,
2,
2
],
[
0,
2,
0,
1,
0,
0,
1,
0,
2,
0,
0,
2
],
[
0,
2,
1,
1,
0,
0,
1,
0,
2,
0,
0,
2
],
[
2,
2,
2,
2,
2,
2,
2,
2,
2,
2,
2,
2
]
],
"rule_severities": {
"bus_definition_conflict": "error",
"bus_entry_needed": "error",
"bus_to_bus_conflict": "error",
"bus_to_net_conflict": "error",
"conflicting_netclasses": "error",
"different_unit_footprint": "error",
"different_unit_net": "error",
"duplicate_reference": "error",
"duplicate_sheet_names": "error",
"endpoint_off_grid": "warning",
"extra_units": "error",
"global_label_dangling": "warning",
"hier_label_mismatch": "error",
"label_dangling": "error",
"lib_symbol_issues": "warning",
"missing_bidi_pin": "warning",
"missing_input_pin": "warning",
"missing_power_pin": "error",
"missing_unit": "warning",
"multiple_net_names": "warning",
"net_not_bus_member": "warning",
"no_connect_connected": "warning",
"no_connect_dangling": "warning",
"pin_not_connected": "error",
"pin_not_driven": "error",
"pin_to_pin": "warning",
"power_pin_not_driven": "error",
"similar_labels": "warning",
"simulation_model_issue": "ignore",
"unannotated": "error",
"unit_value_mismatch": "error",
"unresolved_variable": "error",
"wire_dangling": "error"
}
},
"libraries": {
"pinned_footprint_libs": [],
"pinned_symbol_libs": []
},
"meta": {
"filename": "SmallPSU.kicad_pro",
"version": 1
},
"net_settings": {
"classes": [
{
"bus_width": 12,
"clearance": 0.2,
"diff_pair_gap": 0.25,
"diff_pair_via_gap": 0.25,
"diff_pair_width": 0.2,
"line_style": 0,
"microvia_diameter": 0.3,
"microvia_drill": 0.1,
"name": "Default",
"pcb_color": "rgba(0, 0, 0, 0.000)",
"schematic_color": "rgba(0, 0, 0, 0.000)",
"track_width": 0.2,
"via_diameter": 0.6,
"via_drill": 0.3,
"wire_width": 6
}
],
"meta": {
"version": 3
},
"net_colors": null,
"netclass_assignments": null,
"netclass_patterns": []
},
"pcbnew": {
"last_paths": {
"gencad": "",
"idf": "",
"netlist": "",
"plot": "Outputs/",
"pos_files": "",
"specctra_dsn": "",
"step": "",
"svg": "",
"vrml": ""
},
"page_layout_descr_file": ""
},
"schematic": {
"annotate_start_num": 0,
"bom_export_filename": "ListOfMaterials",
"bom_fmt_presets": [],
"bom_fmt_settings": {
"field_delimiter": ",",
"keep_line_breaks": false,
"keep_tabs": false,
"name": "CSV",
"ref_delimiter": ",",
"ref_range_delimiter": "",
"string_delimiter": "\""
},
"bom_presets": [],
"bom_settings": {
"exclude_dnp": false,
"fields_ordered": [
{
"group_by": false,
"label": "Reference",
"name": "Reference",
"show": true
},
{
"group_by": true,
"label": "Value",
"name": "Value",
"show": true
},
{
"group_by": false,
"label": "Datasheet",
"name": "Datasheet",
"show": true
},
{
"group_by": false,
"label": "Footprint",
"name": "Footprint",
"show": true
},
{
"group_by": false,
"label": "Qty",
"name": "${QUANTITY}",
"show": true
},
{
"group_by": true,
"label": "DNP",
"name": "${DNP}",
"show": true
},
{
"group_by": false,
"label": "#",
"name": "${ITEM_NUMBER}",
"show": false
},
{
"group_by": false,
"label": "Sim.Device",
"name": "Sim.Device",
"show": false
},
{
"group_by": false,
"label": "Sim.Pins",
"name": "Sim.Pins",
"show": false
},
{
"group_by": false,
"label": "Description",
"name": "Description",
"show": false
}
],
"filter_string": "",
"group_symbols": true,
"name": "",
"sort_asc": true,
"sort_field": "Reference"
},
"connection_grid_size": 50.0,
"drawing": {
"dashed_lines_dash_length_ratio": 12.0,
"dashed_lines_gap_length_ratio": 3.0,
"default_line_thickness": 6.0,
"default_text_size": 50.0,
"field_names": [],
"intersheets_ref_own_page": false,
"intersheets_ref_prefix": "",
"intersheets_ref_short": false,
"intersheets_ref_show": false,
"intersheets_ref_suffix": "",
"junction_size_choice": 3,
"label_size_ratio": 0.375,
"operating_point_overlay_i_precision": 3,
"operating_point_overlay_i_range": "~A",
"operating_point_overlay_v_precision": 3,
"operating_point_overlay_v_range": "~V",
"overbar_offset_ratio": 1.23,
"pin_symbol_size": 25.0,
"text_offset_ratio": 0.15
},
"legacy_lib_dir": "",
"legacy_lib_list": [],
"meta": {
"version": 1
},
"net_format_name": "",
"page_layout_descr_file": "",
"plot_directory": "Schematic",
"spice_current_sheet_as_root": false,
"spice_external_command": "spice \"%I\"",
"spice_model_current_sheet_as_root": true,
"spice_save_all_currents": false,
"spice_save_all_dissipations": false,
"spice_save_all_voltages": false,
"subpart_first_id": 65,
"subpart_id_separator": 0
},
"sheets": [
[
"226cc4a7-7069-47ed-9094-17ef0df1222b",
"Root"
]
],
"text_variables": {}
}

6116
Rev 1.0/SmallPSU.kicad_sch Normal file
View File

File diff suppressed because it is too large Load Diff

1
Rev 1.0/fp-info-cache Normal file
View File

@@ -0,0 +1 @@
0